Cisco UCS B440-M1 매뉴얼 - 페이지 9
{카테고리_이름} Cisco UCS B440-M1에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco UCS B440-M1 12 페이지. Bios policy configuring
Cisco UCS B440-M1에 대해서도 마찬가지입니다: 구성 (8 페이지)
페이지 인쇄3.
Verify vNIC default Virtual Interface Adapter placement.
Default Virtual Interface Placement
Pubs−B /org # scope service−profile server 1/7
Pubs−B /org/service−profile # show vnic detail
Name: vnic−emulex−c
Fabric ID: A
Dynamic MAC Addr: 00:25:B5:00:A5:00
Desired Order: 3
Actual Order: 1
Desired VCon Placement: Any
Actual VCon Placement: 2
Equipment: sys/chassis−1/blade−7/adaptor−2/host−eth−1
Name: vnic−emulex−d
Fabric ID: B
Dynamic MAC Addr: 00:25:B5:00:00:00
Desired Order: 4
Actual Order: 2
Desired VCon Placement: Any
Actual VCon Placement: 2
Equipment: sys/chassis−1/blade−7/adaptor−2/host−eth−2
Manual Virtual Interface Adapter Placement
1.
In order to use Cisco UCSM Modify vNICs/vHBAs Placement, refer to Setting the vNIC/vHBA
Placement.
2.
Assign the new vNICs (vnic−emulex−c and vnic−emulex−d) to Interface Card 1 (Slot 1) from Slot 2
Actual VCon Placement: 1
Equipment: sys/chassis−1/blade−7/adaptor−1/host−eth−1
Name: vnic−emulex−b
Fabric ID: B
Dynamic MAC Addr: 00:25:B5:04:B2:07
Desired Order: 2
Actual Order: 2
Desired VCon Placement: 1
Actual VCon Placement: 1
Equipment: sys/chassis−1/blade−7/adaptor−1/host−eth−2