Cisco UCS C Series 문제 해결 팁 - 페이지 10

{카테고리_이름} Cisco UCS C Series에 대한 문제 해결 팁을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco UCS C Series 11 페이지. Security manager 4.3
Cisco UCS C Series에 대해서도 마찬가지입니다: 업그레이드 매뉴얼 (11 페이지), 업그레이드 매뉴얼 (10 페이지), 빠른 시작 매뉴얼 (12 페이지), 설정 (10 페이지), 설치 매뉴얼 (19 페이지)

페이지 인쇄
Cisco UCS C Series 문제 해결 팁
•
Server powers on with no video
1.
Check that the front I/O dongle is properly seated.
2.
Check the front I/O cable connection to Motherboard.
3.
Memory subsystem failure.
•
BMC does not boot
1.
Failure in standby Power rails.
2.
Corrupt BMC BIOS.
Common Troubleshooting Scenarios − Host Does not Boot
Check for:
1.
Verify front I/O dongle is seated correctly.
2.
Check Front I/O cable connection.
3.
Reseat/Replace Dimm(s).
4.
Verify BIOS is not corrupt.
5.
Verify host power rails are good.
6.
Check CPU sockets for bent pins.
7.
Verify Powerok signals are ok.
8.
Verify Resets are good.
Common Troubleshooting Scenarios − BMC
BMC booted. Look for Blade health LED to come on which indicates that the BMC has started.
1.
Check that the Standby power rails are ok.
2.
Check that the BMC bios is not corrupt.
3.
Check that the BMC clock is ok.
4.
Check that standby power is ok and resets are valid.
BMC Ethernet cannot communicate
Check the flex cable connections to Mother Board and Rear I/O.

Verify

Refer to the above sub−sections for verifications.

Troubleshoot

There is currently no specific troubleshooting information available for this configuration.

Related Information

•
Technical Support & Documentation − Cisco Systems
Contacts & Feedback | Help | Site Map
© 2014 − 2015 Cisco Systems, Inc. All rights reserved. Terms & Conditions | Privacy Statement | Cookie Policy | Trademarks of
Cisco Systems, Inc.