Cisco UCS C Series 문제 해결 팁
{카테고리_이름} Cisco UCS C Series에 대한 문제 해결 팁을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco UCS C Series 11 페이지. Security manager 4.3
Cisco UCS C Series에 대해서도 마찬가지입니다: 업그레이드 매뉴얼 (11 페이지), 업그레이드 매뉴얼 (10 페이지), 빠른 시작 매뉴얼 (12 페이지), 설정 (10 페이지), 설치 매뉴얼 (19 페이지)
페이지 인쇄
- 1. Obtaining Showtech Support to Tac
- 2. C−Series Troubleshooting Tips
- 3. Display of System Event Log Events
- 4. Display of CIMC Log
- 5. Run Debug Firmware Utility (Cli)
- 6. Run Diagnostics (Cli)
- 7. Common Troubleshooting Scenarios − Power−On Related
- 8. Common Troubleshooting Scenarios − Host Does Not Boot
UCS C−Series Servers Troubleshooting Tips
Document ID: 111508
Contents
Introduction
Prerequisites
Requirements
Conventions
Introduction
The Cisco Integrated Management Controller (CIMC) is the management service for the UCS C−Series
server. CIMC runs within the server.
You can use a web−based GUI or SSH−based CLI to access, configure, administer, and monitor the server.
Almost all tasks can be performed in either interface. The results of tasks performed in one interface are
automatically displayed in another.
This document provides some CIMC troubleshooting tips and common troubleshooting scenarios for UCS
C−Series servers.
Prerequisites
Requirements
Cisco recommends that you:
•
Have a working knowledge of the Cisco UCS C−Series Server Blade hardware and software
administration.
•
Be familiar with UCS C−Series Servers Cisco Integrated Management Controller.
•
Understand the impact and implications of the different commands described in this document.
•
Be familiar with the UCS components and topology.