Cisco UCS C Series Dicas de resolução de problemas
Procurar online ou descarregar pdf Dicas de resolução de problemas para Servidor Cisco UCS C Series. Cisco UCS C Series 11 páginas. Security manager 4.3
Também para Cisco UCS C Series: Upgrade Manual (11 páginas), Upgrade Manual (10 páginas), Manual de início rápido (12 páginas), Configuração (10 páginas), Manual de instalação (19 páginas)
Imprimir página
- 1. Obtaining Showtech Support to Tac
- 2. C−Series Troubleshooting Tips
- 3. Display of System Event Log Events
- 4. Display of CIMC Log
- 5. Run Debug Firmware Utility (Cli)
- 6. Run Diagnostics (Cli)
- 7. Common Troubleshooting Scenarios − Power−On Related
- 8. Common Troubleshooting Scenarios − Host Does Not Boot
UCS C−Series Servers Troubleshooting Tips
Document ID: 111508
Contents
Introduction
Prerequisites
Requirements
Conventions
Introduction
The Cisco Integrated Management Controller (CIMC) is the management service for the UCS C−Series
server. CIMC runs within the server.
You can use a web−based GUI or SSH−based CLI to access, configure, administer, and monitor the server.
Almost all tasks can be performed in either interface. The results of tasks performed in one interface are
automatically displayed in another.
This document provides some CIMC troubleshooting tips and common troubleshooting scenarios for UCS
C−Series servers.
Prerequisites
Requirements
Cisco recommends that you:
•
Have a working knowledge of the Cisco UCS C−Series Server Blade hardware and software
administration.
•
Be familiar with UCS C−Series Servers Cisco Integrated Management Controller.
•
Understand the impact and implications of the different commands described in this document.
•
Be familiar with the UCS components and topology.