Cisco UCS E Series 문제 해결 매뉴얼 - 페이지 23

{카테고리_이름} Cisco UCS E Series에 대한 문제 해결 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco UCS E Series 28 페이지. Ucs e series unified computing system
Cisco UCS E Series에 대해서도 마찬가지입니다: 제품 개요 (8 페이지), 설치 매뉴얼 (46 페이지)

페이지 인쇄

Overview

Physical Drives Changed State to Unconfigured Good

This section is applicable to E-Series Servers and the SM E-Series NCE. This section is not applicable to

Note

the EHWIC E-Series NCE.

This problem can occur if during bootup, at LSI OpROM, you concurrently entered wrong or empty pass

phrase three times. Because of the "BIOS Continue on Error" feature, the booting process continues, but the

drives cannot be accessed.

To resolve this problem, do the following:

1 Reboot the system, and then enter the correct pass phrase.

2 From LSI WebBIOS, configure the new pass phrase or remove security.

Cannot Access Secure Drives

This section is applicable to E-Series Servers and the SM E-Series NCE. This section is not applicable to

Note

the EHWIC E-Series NCE.

This problem can occur if during bootup, at LSI OpROM, you concurrently entered wrong or empty pass

phrase three times. Because of the "BIOS Continue on Error" feature, the booting process continues, but the

drives cannot be accessed.

To resolve this problem, do the following:

1 Reboot the system, and then enter the correct pass phrase.

2 From LSI WebBIOS, configure the new pass phrase or remove security.

Cannot Reconfigure Drives

This section is applicable to E-Series Servers and the SM E-Series NCE. This section is not applicable to

Note

the EHWIC E-Series NCE.

This problem can occur if during bootup, at LSI OpROM, you concurrently entered wrong or empty pass

phrase three times. Because of the "BIOS Continue on Error" feature, the booting process continues, but the

drives cannot be accessed.

To resolve this problem, do the following:

1 Reboot the system, and then enter the correct pass phrase.

2 From LSI WebBIOS, configure the new pass phrase or remove security.

SNMP Troubleshooting

SNMP Does Not Respond

To resolve this problem, do the following from the CIMC GUI.

Troubleshooting Guide for Cisco UCS E-Series Servers and the Cisco UCS E-Series Network Compute Engine

SNMP Troubleshooting