Cisco UCS E Series 문제 해결 매뉴얼 - 페이지 24

{카테고리_이름} Cisco UCS E Series에 대한 문제 해결 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco UCS E Series 28 페이지. Ucs e series unified computing system
Cisco UCS E Series에 대해서도 마찬가지입니다: 제품 개요 (8 페이지), 설치 매뉴얼 (46 페이지)

페이지 인쇄

SNMP Troubleshooting

Procedure

SUMMARY STEPS

1. In the Navigation pane, click the Admin tab.

2. On the Admin tab, click Communication Services. The Communication Services page appears.

3. Click the SNMP tab.

4. In the SNMP Properties area, make sure that the SNMP Enabled checkbox is checked.

DETAILED STEPS

Step 1

In the Navigation pane, click the Admin tab.

Step 2

On the Admin tab, click Communication Services. The Communication Services page appears.

Step 3

Click the SNMP tab.

Step 4

In the SNMP Properties area, make sure that the SNMP Enabled checkbox is checked.

SNMP Not Sending Traps

To resolve this problem, do the following:

SUMMARY STEPS

1. Make sure you have enabled SNMP. See

2. Configure SNMP Trap Settings. See the "Configuring SNMP Trap Settings" section in the configuration

guides for the version of the CIMC that you are using. The configuration guides are available at:

www.cisco.com/c/en/us/support/servers-unified-computing/ucs-e-series-servers/

products-installation-and-configuration-guides-list.html

DETAILED STEPS

Step 1

Make sure you have enabled SNMP. See

Step 2

Configure SNMP Trap Settings. See the "Configuring SNMP Trap Settings" section in the configuration guides for the

version of the CIMC that you are using. The configuration guides are available at:

servers-unified-computing/ucs-e-series-servers/products-installation-and-configuration-guides-list.html

Troubleshooting Guide for Cisco UCS E-Series Servers and the Cisco UCS E-Series Network Compute Engine

SNMP Does Not Respond, on page 23

Overview

http://www.cisco.com/c/en/us/support/

http://