Cisco UCS E Series Руководство по устранению неполадок - Страница 24

Просмотреть онлайн или скачать pdf Руководство по устранению неполадок для Сервер Cisco UCS E Series. Cisco UCS E Series 28 страниц. Ucs e series unified computing system
Также для Cisco UCS E Series: Обзор продукции (8 страниц), Руководство по установке (46 страниц)

Печатать страницу

Cisco UCS E Series Руководство по устранению неполадок

SNMP Troubleshooting

Procedure

SUMMARY STEPS

1. In the Navigation pane, click the Admin tab.

2. On the Admin tab, click Communication Services. The Communication Services page appears.

3. Click the SNMP tab.

4. In the SNMP Properties area, make sure that the SNMP Enabled checkbox is checked.

DETAILED STEPS

Step 1

In the Navigation pane, click the Admin tab.

Step 2

On the Admin tab, click Communication Services. The Communication Services page appears.

Step 3

Click the SNMP tab.

Step 4

In the SNMP Properties area, make sure that the SNMP Enabled checkbox is checked.

SNMP Not Sending Traps

To resolve this problem, do the following:

SUMMARY STEPS

1. Make sure you have enabled SNMP. See

2. Configure SNMP Trap Settings. See the "Configuring SNMP Trap Settings" section in the configuration

guides for the version of the CIMC that you are using. The configuration guides are available at:

www.cisco.com/c/en/us/support/servers-unified-computing/ucs-e-series-servers/

products-installation-and-configuration-guides-list.html

DETAILED STEPS

Step 1

Make sure you have enabled SNMP. See

Step 2

Configure SNMP Trap Settings. See the "Configuring SNMP Trap Settings" section in the configuration guides for the

version of the CIMC that you are using. The configuration guides are available at:

servers-unified-computing/ucs-e-series-servers/products-installation-and-configuration-guides-list.html

Troubleshooting Guide for Cisco UCS E-Series Servers and the Cisco UCS E-Series Network Compute Engine

SNMP Does Not Respond, on page 23

Overview

http://www.cisco.com/c/en/us/support/

http://