B3 innovations Pico 매뉴얼 - 페이지 8

{카테고리_이름} B3 innovations Pico에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. B3 innovations Pico 12 페이지.

Inserting Thermistor Assembly Be sure your

printer is powered down and Pico is cool to the touch.

Grasp the spring as close to the glass bead of the

thermistor as possible and gently screw the thermistor

spring clockwise until the thermistor seats firmly against

the bottom of the threaded thermistor hole.

Be sure not to push or pull the spring while twisting.

You may need to wiggle the spring during the twisting

motion.

Using heat shrink or a zip tie, secure thermistor wires to

the heater wires being careful not to leave a sharp bend

in the spring strain relief.

Reconnect the thermistor wires leading into your

printer's electronics.

Pico User Guide