Epson GT-9000 서비스 매뉴얼 - 페이지 23

{카테고리_이름} Epson GT-9000에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson GT-9000 41 페이지. Color imaging scanner

EPSON GT-9600

8. Remove one screw(CBB, 3x12) securing the motor, and remove the

motor.

9. Loosen a screw(CBS, M3x6) securing the "Tension Lever

Assembly" to "Motor Frame", move "Lever Assembly, Tension" to

the arrowed direction, releasing the tension of the timing belt of CR

motor. Then, remove "Timing Belt B".

10. Remove 3 "Shaft, Damper, CR" and remove "CR Motor" from "Motor

Frame".

CBS(M3x6)

Figure 3-7. CR Motor Assembly Removal

Disassembly and Assembly

CBB(3x12)

CR Motor Assembly

Disassembly and Assembly

3.1.5 Lamp Assembly Removal

1. Remove carriage assembly. (Refer to Service Manual of GT-9500)

2. Remove 2 screws(CB, M3x6) securing "Cover, Rear, Carriage" to

"Carriage Assembly", and remove "Cover, Rear, Carriage".

3. Remove 3 screws (CB, M 3x6) securing "Cover, Carriage" to

"Carriage Assembly", and remove "Cover, Carriage".

One screw(CB, M3x8) under "Cover,

Rear, Carriage".

CB(M3x6)

Figure 3-8. Carriage Cover Removal

Revision A