Cisco AS5400XM 설치 매뉴얼 - 페이지 2
{카테고리_이름} Cisco AS5400XM에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco AS5400XM 16 페이지.
페이지 인쇄Setting Up the Chassis
When installing or replacing the unit, the ground connection must always be made first and
Warning
disconnected last. Statement 1046
This unit is intended for installation in restricted access areas. A restricted access area can be
Warning
accessed only through the use of a special tool, lock and key, or other means of security.
Statement 1017
Setting the Chassis on a Desktop
The location of the chassis is extremely important for proper operation. Equipment placed too close
together, inadequate ventilation, and inaccessible panels can cause malfunctions and shutdowns, and can
make maintenance difficult. The following information will help you to plan the location of the chassis:
•
•
Attach the rubber feet as shown in
with your Cisco AS5400XM universal gateway.
Figure 3-1
Cisco AS5400XM Universal Gateway Chassis Installation Guide
3-2
Plan for access to both front and rear panels of the chassis.
Ensure that the room where the chassis operates has adequate ventilation. Remember that electrical
equipment generates heat. Ambient air temperature may not cool equipment to acceptable operating
temperatures without adequate ventilation.
Attaching the Rubber Feet
Universal gateway
chassis bottom
Chapter 3
Figure
3-1. Rubber feet are included in the accessory kit that shipped
Installing the Cisco AS5400XM Universal Gateway
OL-6418-02