Cisco AS5400XM Handleiding installeren - Pagina 2

Blader online of download pdf Handleiding installeren voor {categorie_naam} Cisco AS5400XM. Cisco AS5400XM 16 pagina's.

Setting Up the Chassis

When installing or replacing the unit, the ground connection must always be made first and

Warning

disconnected last. Statement 1046

This unit is intended for installation in restricted access areas. A restricted access area can be

Warning

accessed only through the use of a special tool, lock and key, or other means of security.

Statement 1017

Setting the Chassis on a Desktop

The location of the chassis is extremely important for proper operation. Equipment placed too close

together, inadequate ventilation, and inaccessible panels can cause malfunctions and shutdowns, and can

make maintenance difficult. The following information will help you to plan the location of the chassis:

•

Attach the rubber feet as shown in

with your Cisco AS5400XM universal gateway.

Figure 3-1

Cisco AS5400XM Universal Gateway Chassis Installation Guide

3-2

Plan for access to both front and rear panels of the chassis.

Ensure that the room where the chassis operates has adequate ventilation. Remember that electrical

equipment generates heat. Ambient air temperature may not cool equipment to acceptable operating

temperatures without adequate ventilation.

Attaching the Rubber Feet

Universal gateway

chassis bottom

Chapter 3

Figure

3-1. Rubber feet are included in the accessory kit that shipped

Installing the Cisco AS5400XM Universal Gateway

OL-6418-02