Cisco ASR 5000 설치 매뉴얼 - 페이지 24
{카테고리_이름} Cisco ASR 5000에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco ASR 5000 37 페이지. Applying power and verifying the installation
Cisco ASR 5000에 대해서도 마찬가지입니다: 설치 매뉴얼 (18 페이지), 설치 매뉴얼 (33 페이지), 설치 절차 (8 페이지)
페이지 인쇄
Checking the Card-Level LEDs on the Optical (ATM) Line Card
The location of these LEDs is displayed in the figure below and the various states are described in the following
three tables.
Figure 5: Card-Level Status LEDs for the Optical (ATM) Line Card
Optical (ATM) Line Card Run/Fail LED States
The Run/Fail LED on the ATM line card indicates the overall status of the card. These LEDs are illuminated
steady green for normal operation.
If the LED is not green, use the troubleshooting information in the table to diagnose the problem.
Table 21: Optical (ATM) Line Card Run/Fail LED States
Color
Green
Red
ASR 5000 Installation Guide
24
Description
Troubleshooting
Card powered with no
None needed.
errors detected
Card powered with
Errors were detected during the POSTs. It is likely that the errors
error(s) detected
were logged to the system's command line interface during the
boot process.
Refer to the System Administration Guide for troubleshooting
information.
Applying Power and Verifying the Installation