Cisco ASR 5000 설치 매뉴얼 - 페이지 28
{카테고리_이름} Cisco ASR 5000에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco ASR 5000 37 페이지. Applying power and verifying the installation
Cisco ASR 5000에 대해서도 마찬가지입니다: 설치 매뉴얼 (18 페이지), 설치 매뉴얼 (33 페이지), 설치 절차 (8 페이지)
Card-Level LEDs on the Channelized (STM-1/OC-3) Line Card
LED
Link
Card-Level LEDs on the Channelized (STM-1/OC-3) Line Card
Each Channelized line card (CLC2) is equipped with card-level status LEDs:
• Run/Fail
• Active
• Standby
The location of these LEDs is displayed in the figure below. The various states are described in the following
three tables.
Figure 7: Card-Level Status LEDs for the Channelized Line Card
ASR 5000 Installation Guide
28
LED Color
Green (On)
Yellow (On)
OFF
Applying Power and Verifying the Installation
Description
Illuminates Green when a fiber optic cable is plugged
into the port and the receive signal is detected by the
SFP module.
Illuminates Yellow when an SFP module is plugged
into the port.
Off indicates that there is no SFP module plugged into
the port.