Cisco IOS Router 시작하기 매뉴얼 - 페이지 3

{카테고리_이름} Cisco IOS Router에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco IOS Router 12 페이지. Siemens hipath 4000 release 1 and siemens hicom 330e release 3.1 to cisco ios voice gateway using e1 qsig with h.323
Cisco IOS Router에 대해서도 마찬가지입니다: 제품 정보 (11 페이지), 애플리케이션 노트 (41 페이지)

페이지 인쇄

Additional Commands and References

To verify the contents of the flash, enter the following command at the router prompt:

show flash:

training#show flash:

24576K bytes of processor board System flash (Intel Strataflash)

Directory of flash:/

2 –rwx 17198508 --- -- ---- --:--:-- ----- c870-

advipservicesk9-mz.12.4-11.T1

3 drwx 0 Aug 11 2006 23:16:18 -08:00 ipsstore

23482368 bytes total (6279168 bytes free)

To rename the directory name, use the Rename Directory Command example or the combination

of the Remove Directory Command and Create Directory Command at the router prompt.

Rename the directory (Rename Directory Command):

rename <current name> <new name>

training#rename ipsstore ips

Destination filename [ips]?

First remove the directory (Remove Directory Command):

rmdir <current directory name>

Create the directory again (Create Directory Command):

mkdir <new directory name>

training#rmdir ips

Remove directory filename [ips]?

Delete flash:ips? [confirm]

Removed dir flash:ips

training#mkdir ipsstore

Create directory filename [ipsstore]?

Created dir flash:ipsstore

White Paper

Page 3 of 12