Cisco IOS Router Getting Started Manual - Page 3

Browse online or download pdf Getting Started Manual for Gateway Cisco IOS Router. Cisco IOS Router 12 pages. Siemens hipath 4000 release 1 and siemens hicom 330e release 3.1 to cisco ios voice gateway using e1 qsig with h.323
Also for Cisco IOS Router: Product Information (11 pages), Application Note (41 pages)

Print Page

Additional Commands and References

To verify the contents of the flash, enter the following command at the router prompt:

show flash:

training#show flash:

24576K bytes of processor board System flash (Intel Strataflash)

Directory of flash:/

2 –rwx 17198508 --- -- ---- --:--:-- ----- c870-

advipservicesk9-mz.12.4-11.T1

3 drwx 0 Aug 11 2006 23:16:18 -08:00 ipsstore

23482368 bytes total (6279168 bytes free)

To rename the directory name, use the Rename Directory Command example or the combination

of the Remove Directory Command and Create Directory Command at the router prompt.

Rename the directory (Rename Directory Command):

rename <current name> <new name>

training#rename ipsstore ips

Destination filename [ips]?

First remove the directory (Remove Directory Command):

rmdir <current directory name>

Create the directory again (Create Directory Command):

mkdir <new directory name>

training#rmdir ips

Remove directory filename [ips]?

Delete flash:ips? [confirm]

Removed dir flash:ips

training#mkdir ipsstore

Create directory filename [ipsstore]?

Created dir flash:ipsstore

White Paper

Page 3 of 12