Cisco S195 시작하기 매뉴얼 - 페이지 7

{카테고리_이름} Cisco S195에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco S195 18 페이지. Web security appliance
Cisco S195에 대해서도 마찬가지입니다: 매뉴얼 (24 페이지), 하드웨어 설치 매뉴얼 (50 페이지)

페이지 인쇄

Click Local Area Connection and then click Properties.

Step 4

Choose Internet Protocol (TCP/IP) and then click Properties.

Step 5

Choose Use the Following IP Address.

Step 6

Enter the following changes:

Step 7

Click OK and Close to exit the dialog box.

Step 8

Temporarily Change Your IP Address on Mac

Note

The exact steps depend on the version of your operating system.

Procedure

Launch the Apple menu and choose System Preferences.

Step 1

Click Network.

Step 2

Click lock icon to allow changes.

Step 3

Select the Ethernet network configuration with the green icon. This is your active connection. Then click

Step 4

Advanced.

Click the TCP/IP tab and from Ethernet settings, choose Manually from the drop-down list.

Step 5

Enter the following changes:

Step 6

Click OK.

Step 7

Connect to the Appliance

After rack-mounting the appliance, follow these steps to connect cables, turn on power, and verify

connectivity.

•

IP Address: 192.168.42.43

–

Subnet Mask: 255.255.255.0

–

Default Gateway: 192.168.42.1

–

IP Address: 192.168.42.43

–

Subnet Mask: 255.255.255.0

–

Router: 192.168.42.1

–

Cisco S195 Appliance, page 8

Cisco S395 Appliance, page 9

Cisco S695 Appliance, page 10

Cisco S695F Appliance, page 12

Cisco Web Security Appliance S195, S395, S695, and S695F Getting Started Guide

Connect to the Appliance