Cisco S195 Getting Started Manual - Page 7

Browse online or download pdf Getting Started Manual for Gateway Cisco S195. Cisco S195 18 pages. Web security appliance
Also for Cisco S195: Manual (24 pages), Hardware Installation Manual (50 pages)

Cisco S195 Getting Started Manual
Click Local Area Connection and then click Properties.
Step 4
Choose Internet Protocol (TCP/IP) and then click Properties.
Step 5
Choose Use the Following IP Address.
Step 6
Enter the following changes:
Step 7
Click OK and Close to exit the dialog box.
Step 8
Temporarily Change Your IP Address on Mac
Note
The exact steps depend on the version of your operating system.
Procedure
Launch the Apple menu and choose System Preferences.
Step 1
Click Network.
Step 2
Click lock icon to allow changes.
Step 3
Select the Ethernet network configuration with the green icon. This is your active connection. Then click
Step 4
Advanced.
Click the TCP/IP tab and from Ethernet settings, choose Manually from the drop-down list.
Step 5
Enter the following changes:
Step 6
Click OK.
Step 7

Connect to the Appliance

After rack-mounting the appliance, follow these steps to connect cables, turn on power, and verify
connectivity.
IP Address: 192.168.42.43
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.42.1
IP Address: 192.168.42.43
Subnet Mask: 255.255.255.0
Router: 192.168.42.1
Cisco S195 Appliance, page 8
Cisco S395 Appliance, page 9
Cisco S695 Appliance, page 10
Cisco S695F Appliance, page 12
Cisco Web Security Appliance S195, S395, S695, and S695F Getting Started Guide
Connect to the Appliance
7