Cisco VG202 빠른 시작 매뉴얼 - 페이지 18

{카테고리_이름} Cisco VG202에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco VG202 19 페이지. Voice gateways
Cisco VG202에 대해서도 마찬가지입니다: 소프트웨어 구성 매뉴얼 (50 페이지), 하드웨어 설치 매뉴얼 (50 페이지), 매뉴얼 (10 페이지), 하드웨어 설치 매뉴얼 (48 페이지)

ip address 172.1.2.3 255.255.0.0

Step 11 Respond to the following prompts. Enter 2 to save the initial configuration.

[0] Go to the IOS command prompt without saving this config.

[1] Return if possible to the setup without saving this config.

[2] Save this configuration to nvram and exit.

Enter your selection [2]: 2

Building configuration...

Use the enabled mode 'configure' command to modify this configuration.

Press RETURN to get started! RETURN

The user prompt is displayed.

VG>

Verifying and Saving Your Configuration

To verify the configuration and save it in NVRAM so that the configuration remains in effect after you restart the voice gateway,

enter the following commands:

Command

Step 1

VG# show running-config

Step 2

VG# show startup-config

Step 3

VG# show voice port summary

Step 4

VG# copy running-config startup-config

Americas Headquarters

Cisco Systems, Inc.

San Jose, CA

Cisco has more than 200 offices worldwide. Addresses, phone numbers, and fax numbers are listed on the Cisco Website at www.cisco.com/go/offices.

Printed in the USA on recycled paper containing 10% postconsumer waste.

OL-xxxxx-xx

Description

Displays the current operating configuration, including any

changes you have made.

Displays the configuration currently stored in NVRAM.

Displays the voice port parameter settings.

Writes the current running configuration to NVRAM, where it

overwrites the startup configuration and becomes the new startup

configuration.

Note

Asia Pacific Headquarters

Cisco Systems (USA) Pte. Ltd.

Singapore

If you reboot the voice gateway or turn off the power

before you complete this step, you lose the configuration.

Europe Headquarters

Cisco Systems International BV Amsterdam,

The Netherlands