DigiVac Bullseye Precision Gauge Piezo 사용자 설명서 - 페이지 12

{카테고리_이름} DigiVac Bullseye Precision Gauge Piezo에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DigiVac Bullseye Precision Gauge Piezo 20 페이지.

In many cases, a gauge sensor may become fouled with oil or other foreign matter. It is often

possible to restore the functionality of contaminated probes with cleaning. If the contaminant

is known, the tube should be filled with a fluid that is known to be a solvent to that

contaminant. As an example, ether is often effective in removing residues of some oils.

Commercial carburetor cleaners are very powerful solvents and are highly effective against

some contaminants.

After cleaning with solvents, the gauge sensor should be completely dried or flushed with a

If this is not done,

volatile solvent to assure that it is dry prior to reinstalling it.

contamination of the system may result.

Bluetooth Operation

The Bullseye Piezo comes equipped with a Bluetooth module, which interfaces with the

Vacuum Gauge Application for remote, real-time vacuum monitoring via Apple Store at

https://appsto.re/us/B1Ix5.i

,or Google Play Store at

https://play.google.com/store/apps/details?id=com.digivac.bullseye

ranging up to 300 feet

under ideal conditions.

To enable Bluetooth monitoring, scroll to the menu section marked Bluetooth, and enable or

disable the signal with the up or down arrow. See the included Vacuum Gauge Application

instructional addendum to enable app functioning.

The 775i is designed for trouble free use with little or no maintenance required. A few best

practices should be followed. While not required for accuracy, it is best to mount sensor in

stem down orientation where the threads are down towards the ground, and the wire is up.

This will facilitate draining of any foreign matter from the sensor to help mitigate physical

obstruction of the diaphragm. Keep the measurement unit clean and dry to prevent foreign