Epson TM-S9000MJ 사용자 설명서 - 페이지 17
{카테고리_이름} Epson TM-S9000MJ에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson TM-S9000MJ 25 페이지.
Epson TM-S9000MJ에 대해서도 마찬가지입니다: 설정 매뉴얼 (2 페이지), 설정 매뉴얼 (2 페이지), 여기에서 시작 (2 페이지)
페이지 인쇄
Cleaning the Thermal Head
Epson recommends cleaning the thermal head periodically (generally every 3 months) to
maintain thermal printing quality.
CAUTION:
The thermal head can be very hot after printing. Be careful not to touch it, and let it cool before you
clean it.
Do not damage the thermal head by touching it with your fingers or any hard object.
Turn off the product, open the roll paper cover, and clean the thermal elements of the thermal
head with a cotton swab moistened with an alcohol solvent (ethanol or IPA).
Cleaning the MICR Head
When the MICR head becomes dirty, the product cannot read the magnetic ink characters
normally.
Clean the MICR head every 6 months or every 100,000 passes by setting the following cleaning
sheet in the same way as cut sheet paper. (See "Inserting Cut Sheet Paper" on page 13.)
KIC Team, Inc.
•
Waffletechnology
•
Epson Check Scanner Cleaning Kit (model:KWEPS-KCS2)
Note:
Use a cleaning sheet only one time; then discard it.
It is recommended to clean the MICR head once per week or once every 2,000 sheets for good
reading results.
It is recommended to clean the scanner after cleaning the MICR head.
Cleaning the Scanner
If the glass of the scanner gets soiled from ink or paper dust, the quality of scanned data may
deteriorate. Clean the glass every 6 months or every 100,000 passes by following the steps
below.
Note:
It is recommended to clean the scanner once per week or once every 2,000 sheets for good reading
results.
®
MICR cleaning card (model:CS1B15WS)
17