Epson TM-S9000MJ Руководство пользователя - Страница 17

Просмотреть онлайн или скачать pdf Руководство пользователя для Сканер Epson TM-S9000MJ. Epson TM-S9000MJ 25 страниц.
Также для Epson TM-S9000MJ: Руководство по настройке (2 страниц), Руководство по настройке (2 страниц), Начните здесь (2 страниц)

Cleaning the Thermal Head

Epson recommends cleaning the thermal head periodically (generally every 3 months) to

maintain thermal printing quality.

CAUTION:

The thermal head can be very hot after printing. Be careful not to touch it, and let it cool before you

clean it.

Do not damage the thermal head by touching it with your fingers or any hard object.

Turn off the product, open the roll paper cover, and clean the thermal elements of the thermal

head with a cotton swab moistened with an alcohol solvent (ethanol or IPA).

When the MICR head becomes dirty, the product cannot read the magnetic ink characters

normally.

Clean the MICR head every 6 months or every 100,000 passes by setting the following cleaning

sheet in the same way as cut sheet paper. (See "Inserting Cut Sheet Paper" on page 13.)

KIC Team, Inc.

•

Waffletechnology

•

Epson Check Scanner Cleaning Kit (model:KWEPS-KCS2)

Note:

Use a cleaning sheet only one time; then discard it.

It is recommended to clean the MICR head once per week or once every 2,000 sheets for good

reading results.

It is recommended to clean the scanner after cleaning the MICR head.

If the glass of the scanner gets soiled from ink or paper dust, the quality of scanned data may

deteriorate. Clean the glass every 6 months or every 100,000 passes by following the steps

below.

Note:

It is recommended to clean the scanner once per week or once every 2,000 sheets for good reading

results.

MICR cleaning card (model:CS1B15WS)