3Com OfficeConnect WX1200 빠른 시작 매뉴얼 - 페이지 4

{카테고리_이름} 3Com OfficeConnect WX1200에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 3Com OfficeConnect WX1200 10 페이지. Secure converged networks enterprise edition
3Com OfficeConnect WX1200에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (10 페이지), 데이터시트 (6 페이지), 제품 설명서 (15 페이지)

페이지 인쇄

LAN S

IRELESS

WITCH AND

Click OK to close the Network Connection dialog

box.

Using the quickstart Command

This example configures the following parameters:

System name: WX1200-Corp

Country code (regulatory domain): US

System IP address: 10.10.10.4, on IP interface

10.10.10.4 255.255.255.0

The quickstart script asks for an IP address and subnet

mask for the system IP address, and converts the

input into an IP interface with a subnet mask, and a

system IP address that uses that interface. Likewise, if

you configure this information manually instead of

using the quickstart command, you must configure

the interface and system IP address separately.

Default route: 10.10.10.1

Administrative user wxadmin, with password let-

mein. The only management access the switch

allows by default is CLI access through the serial

connection.

System Time and date parameters:

Date: 15th of November, 2004

Time: 6:58 PM

Timezone: PST (Pacific Standard Time), with an

offset of -8 hours from Universal Coordinated

Time (UTC)

Unencrypted SSID name: public

ONTROLLER

UICK

TART

UIDE

Username user1 and password pass1 for Web

AAA; username user2 and password pass2 for

Web AAA

Encrypted SSID name: corporate

Username alice and password alicepass for 802.1X

authentication; username bob and password bob-

pass for 802.1X authentication

Directly connected MAPs on port 2 and 3, each

model AP2750

You can configure a directly connected MAP only on

the WX1200. You can configure Distributed MAPs on

the WX1200 or WX4400.

The IP addresses, usernames, and passwords in this

document are examples. Use values that are appropri-

ate for your organization.

If you configure time and date parameters, you will

be required to enter a name for the timezone, and

then enter the value of the timezone (the offset from

UTC) separately. You can use a string of up to 32

alphabetic characters as the timezone name.

Figure 1 shows an example. Users bob and alice can

access encrypted SSID corporate on either of the

MAPs. Users user1 and user2 can use the same MAPs

to access unencrypted SSID public. Although the

same hardware supports both SSIDs and sets of users,

AAA ensures that only the users who are authorized

to access an SSID can access that SSID. Users of sepa-

rate SSIDs can even be in the same VLAN, as they are

in this example.