3Com OfficeConnect WX1200 Manual de início rápido - Página 4
Procurar online ou descarregar pdf Manual de início rápido para Router de rede 3Com OfficeConnect WX1200. 3Com OfficeConnect WX1200 10 páginas. Secure converged networks enterprise edition
Também para 3Com OfficeConnect WX1200: Manual de início rápido (2 páginas), Manual de início rápido (10 páginas), Ficha de dados (6 páginas), Manual do produto (15 páginas)
Imprimir página
4
W
LAN S
IRELESS
WITCH AND
Click OK to close the Network Connection dialog
18
box.
Using the quickstart Command
This example configures the following parameters:
System name: WX1200-Corp
Country code (regulatory domain): US
System IP address: 10.10.10.4, on IP interface
10.10.10.4 255.255.255.0
The quickstart script asks for an IP address and subnet
mask for the system IP address, and converts the
input into an IP interface with a subnet mask, and a
system IP address that uses that interface. Likewise, if
you configure this information manually instead of
using the quickstart command, you must configure
the interface and system IP address separately.
Default route: 10.10.10.1
Administrative user wxadmin, with password let-
mein. The only management access the switch
allows by default is CLI access through the serial
connection.
System Time and date parameters:
Date: 15th of November, 2004
Time: 6:58 PM
Timezone: PST (Pacific Standard Time), with an
offset of -8 hours from Universal Coordinated
Time (UTC)
Unencrypted SSID name: public
C
Q
S
G
ONTROLLER
UICK
TART
UIDE
Username user1 and password pass1 for Web
AAA; username user2 and password pass2 for
Web AAA
Encrypted SSID name: corporate
Username alice and password alicepass for 802.1X
authentication; username bob and password bob-
pass for 802.1X authentication
Directly connected MAPs on port 2 and 3, each
model AP2750
You can configure a directly connected MAP only on
the WX1200. You can configure Distributed MAPs on
the WX1200 or WX4400.
The IP addresses, usernames, and passwords in this
document are examples. Use values that are appropri-
ate for your organization.
If you configure time and date parameters, you will
be required to enter a name for the timezone, and
then enter the value of the timezone (the offset from
UTC) separately. You can use a string of up to 32
alphabetic characters as the timezone name.
Figure 1 shows an example. Users bob and alice can
access encrypted SSID corporate on either of the
MAPs. Users user1 and user2 can use the same MAPs
to access unencrypted SSID public. Although the
same hardware supports both SSIDs and sets of users,
AAA ensures that only the users who are authorized
to access an SSID can access that SSID. Users of sepa-
rate SSIDs can even be in the same VLAN, as they are
in this example.