Epson 2000P - Stylus Photo Color Inkjet Printer 설정 매뉴얼 - 페이지 3

{카테고리_이름} Epson 2000P - Stylus Photo Color Inkjet Printer에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson 2000P - Stylus Photo Color Inkjet Printer 17 페이지. Product support bulletin(s)
Epson 2000P - Stylus Photo Color Inkjet Printer에 대해서도 마찬가지입니다: 카트리지 교체 (2 페이지), 제품 지원 게시판 (6 페이지), 제품 지원 게시판 (1 페이지), 사양 (1 페이지), 제품 정보 (13 페이지), 사용자 설명서 (12 페이지), 제품 지원 게시판 (3 페이지), 제품 지원 게시판 (2 페이지), 제품 지원 게시판 (4 페이지), 제품 지원 게시판 (7 페이지), 빠른 시작 매뉴얼 (2 페이지), 설치 지침 매뉴얼 (8 페이지)

Connecting the Printer

If you are connecting the printer to a PC, it is possible to use either the

parallel or USB interface. Macintosh computers must be connected via

the USB interface. Depending upon your geographic location, you may

need to acquire the appropriate cable. See "Options and Consumable

Products" in the Daily Use guide for details.

Note:

In order to connect your PC via the USB interface, your computer must be

equipped with a USB port.

Using the parallel interface for PCs

To connect the printer to a parallel port, you need a shielded, twisted-

pair parallel cable. Follow the steps below.

1. Make sure both the printer and computer are turned off.

2. Plug the cable connector securely into the printer's interface

connector. Then squeeze the wire clips together until they lock in

place on both sides. If your cable has a ground wire, connect it to the

ground connector below the interface connector.

3. Plug the other end of the cable into the computer's parallel interface.

If there is a ground wire at the computer end of the cable, connect it

to the ground connector at the back of the computer.