Epson 2000P - Stylus Photo Color Inkjet Printer Installatiehandleiding - Pagina 3

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Epson 2000P - Stylus Photo Color Inkjet Printer. Epson 2000P - Stylus Photo Color Inkjet Printer 17 pagina's. Product support bulletin(s)
Ook voor Epson 2000P - Stylus Photo Color Inkjet Printer: Cartridges vervangen (2 pagina's), Product ondersteunings bulletin (6 pagina's), Product ondersteunings bulletin (1 pagina's), Specificaties (1 pagina's), Productinformatie (13 pagina's), Gebruikershandleiding (12 pagina's), Product ondersteunings bulletin (3 pagina's), Product ondersteunings bulletin (2 pagina's), Product ondersteunings bulletin (4 pagina's), Product ondersteunings bulletin (7 pagina's), Snelstarthandleiding (2 pagina's), Handleiding voor installatie-instructies (8 pagina's)

Connecting the Printer

If you are connecting the printer to a PC, it is possible to use either the

parallel or USB interface. Macintosh computers must be connected via

the USB interface. Depending upon your geographic location, you may

need to acquire the appropriate cable. See "Options and Consumable

Products" in the Daily Use guide for details.

Note:

In order to connect your PC via the USB interface, your computer must be

equipped with a USB port.

Using the parallel interface for PCs

To connect the printer to a parallel port, you need a shielded, twisted-

pair parallel cable. Follow the steps below.

1. Make sure both the printer and computer are turned off.

2. Plug the cable connector securely into the printer's interface

connector. Then squeeze the wire clips together until they lock in

place on both sides. If your cable has a ground wire, connect it to the

ground connector below the interface connector.

3. Plug the other end of the cable into the computer's parallel interface.

If there is a ground wire at the computer end of the cable, connect it

to the ground connector at the back of the computer.