Digizoid ZO 제품 설명서 - 페이지 7

{카테고리_이름} Digizoid ZO에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Digizoid ZO 13 페이지. Personal subwoofer
Digizoid ZO에 대해서도 마찬가지입니다: 스마트 시작 매뉴얼 (6 페이지), 사용자 설명서 (4 페이지)

페이지 인쇄

coNTroL your zo

Powering On/Off

To turn your zo on, push in and release the SVC. When on, the

LightScale indicator will illuminate.

To turn zo off, push in and release the SVC.

Adjusting the subwoofer intensity

When your zo is turned on for the first time, the SVC will be set

at the median contour level, and the LightScale indicator will

illuminate an amber color.

To decrease the contour level, rotate the SVC downwards, while

making sure not to push it in. When the contour level reaches

the minimum setting, the LightScale will transition to green.

To increase the contour level, rotate the SVC upwards, again

making sure not to push it in. When the contour level reaches

the maximum setting, the LightScale will transition to red.

LightScale Colors

min

We designed zo's contouring profiles such that the increment of

change is greater on the low intensity side (green). Therefore, you

will notice a more significant change in the LightBar's color and the

corresponding subwoofer intensity as you step up.

We did this so that when you reach the max profile (red); the sub-

woofer intensity would not be overbearing.

med

max

to turn on

push switch in

then release

to decrease

rotate

downwards

to increase

rotate

upwards

5 : 10