Acuity Brands CPANL DCMK 14 설치 지침 매뉴얼 - 페이지 4

{카테고리_이름} Acuity Brands CPANL DCMK 14에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Acuity Brands CPANL DCMK 14 17 페이지. Surface mount kit

Attach surface mount hinges and latches to CPANL with hand screwdriver.

Attach Tether Cable to appropriate latch assembly.

– DO NOT USE DRILL OR POWER TOOL, DO NOT OVERTIGHTEN

CPANL 1X4 40/50/60LM __K

CPANL 2X2 40/50/60LM __K

CPANL 2X4 40/50/60LM __K

Mark and drill mounting locations on ceiling –

 For surface mounting directly to the ceiling, complete the following installation instructions with the mounting hardware (provided) to ensure

a proper and safe installation. Follow all local codes.

 Ensure the bracket is even by measuring both ends to make sure they are the same, see Dimension AA & BB in Table 4.

 Position the mounting bracket in relationship to the J-BOX as shown in Figure 4 (Dim CC & DD) and mark four (4) mounting holes.

 (For drywall ceiling): Drill four (4) mounting holes with ½" drill bit on previously marked locations

(For other ceilings): Drill appropriately sized hole for fasteners being used (not provided) or continue onto Step Five.

12/8/2020 Rev C

CPANL SURFACE MOUNT KIT - INSTALLATION INSTRUCTIONS

INSTRUCTIONS D'INSTALLATION DE CPANL KIT DE MONTAGE EN SURFACE

INSTRUCCIONES DE INSTALACIÓN DE CPANL KIT DE MONTAJE EN SUPERFICIES

H H

Figure 3

CPANL 1X4 ALO1 SWW7

CPANL 2X2 ALO1 SWW7

CPANL 2X4 ALO6 SWW7

H (x10)

Page 3 of 16