Epson DLQ-3500 빠른 매뉴얼 - 페이지 11

{카테고리_이름} Epson DLQ-3500에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson DLQ-3500 32 페이지. Epson serial impact dot matrix printers
Epson DLQ-3500에 대해서도 마찬가지입니다: 설정 매뉴얼 (31 페이지), 공지 사항 (1 페이지), 참조 매뉴얼 (34 페이지)

페이지 인쇄

4. Position the left sprocket so that the

sprocket pins are to the left of the arrow

mark on the back of the printer. Then

push down the lock lever to lock the

sprocket in place.

Note:

Printing starts at the arrow mark on the back

of the printer.The unprintable area is to the

left of the arrow mark.

5. Slide the right sprocket to roughly match

the width of your paper, but do not lock

it.

6. Slide the center paper support to the

middle of the two sprockets.

EPSON DLQ-3500 Quick Guide

7. Open the sprocket covers.

* sprocket cover

8. Fit the first three holes of the continuous

paper over the sprocket pins on both

sides. Be sure to position your paper

supply so that the printable side faces

up.

Caution:

Make sure the first sheet of your

continuous paper has a clean,

straight edge so that it can feed

smoothly into the printer.

9. Close the sprocket covers.

Continuous Paper (2/4)