Epson DLQ-3500 빠른 매뉴얼 - 페이지 13

{카테고리_이름} Epson DLQ-3500에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson DLQ-3500 32 페이지. Epson serial impact dot matrix printers
Epson DLQ-3500에 대해서도 마찬가지입니다: 설정 매뉴얼 (31 페이지), 공지 사항 (1 페이지), 참조 매뉴얼 (34 페이지)

페이지 인쇄

3. Tear off all printed pages using the

tear-off edge of the printer cover.

* tear-off edge

When you resume printing, the printer

feeds the paper back to the top-of-form

position and begins printing. (You can

also manually feed the paper back to the

top-of-form position by pressing the

Tear Off/Special Paper button.)

Advancing paper to the tear-off position

automatically

To automatically advance your printed

documents to the tear-off position, turn on

the auto tear-off mode and select the

appropriate page length for continuous

paper in the default-setting mode. See

"Changing default settings" for instructions

on how to change the default settings.

The steps below describe how to use auto

tear-off.

1. When printing is finished, the printer

advances the perforation of the final

printed page to the tear-off position.

EPSON DLQ-3500 Quick Guide

2. Tear off all printed pages using the

tear-off edge of the printer cover.

Note:

If your paper's perforation is not properly

aligned with the tear-off edge, you can adjust

the tear-off position using the Micro Adjust

function as described in "Adjusting the

tear-off position."

3. When you resume printing, the printer

feeds the paper back to the top-of-form

position and begins printing. (You can

also manually feed the paper back to the

top-of-form position by pressing the

Tear Off/Special Paper button.)

Removing continuous paper

Follow these steps to remove continuous

paper from the printer:

1. Press the Tear Off/Special Paper

button after the printer finishes printing

your document. The printer advances

the paper to the tear-off position.

Note:

When the auto tear-off function is on, the

printer advances the paper perforation to the

tear-off position automatically. You can turn

on the auto tear-off function by changing the

default settings. See "Changing default

settings" for instructions.

2. Tear off the printed pages.

3. Press the Load/Eject button to feed the

continuous paper backward out of the

printer and into the standby position.

4. To completely remove continuous paper

from the printer, open the sprocket

covers. Remove the paper from the

tractor unit, and then close the sprocket

covers.

Continuous Paper (4/4)