Acuity Brands Lighting Lithonia Lighting CSXW LED 사용 설명서 - 페이지 6
{카테고리_이름} Acuity Brands Lighting Lithonia Lighting CSXW LED에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Acuity Brands Lighting Lithonia Lighting CSXW LED 6 페이지.
페이지 인쇄Installation Instructions
CSXW LED
7. Slide the fixture into place by firmly applying pressure against the fixture onto the wall mounted plate and pushing down. Verify the
fixture is securely seated and parallel to the wall. See figure 7 (Note: WST fixture shown--uses the same mounting bracket).
8. Tighten the (2) hex socket set screws on the bottom of the housing with an 1/8" allen wrench evenly (10-15 in. lbs maximum). See figure
8a and 8b.
Troubleshooting: If this fixture fails to operate properly, check to make sure: • The fixture is wired correctly.
rectly.
• The line voltage at the fixture is correct. If all these variables have been checked and the fixture still does not operate as speci-
fied, contact your local Lithonia Lighting distributor.
figure 8a
Lithonia Lighting Outdoor • One Lithonia Way • Conyers, Georgia 30012
Phone: 800-279-8041 • Fax: 770.918.1209 •
© 2010 Acuity Brands Lighting, Inc. All rights reserved. Rev 4/11
figure 7
www.lithonia.com
figure 8b
• The fixture is grounded cor-
Part Number: RJ521346 Rev C
Revision Date: 5-30-17