Acuity Brands Lighting Lithonia Lighting CSXW LED Manual de instruções - Página 6
Procurar online ou descarregar pdf Manual de instruções para Luz exterior Acuity Brands Lighting Lithonia Lighting CSXW LED. Acuity Brands Lighting Lithonia Lighting CSXW LED 6 páginas.
Imprimir páginaInstallation Instructions
CSXW LED
7. Slide the fixture into place by firmly applying pressure against the fixture onto the wall mounted plate and pushing down. Verify the
fixture is securely seated and parallel to the wall. See figure 7 (Note: WST fixture shown--uses the same mounting bracket).
8. Tighten the (2) hex socket set screws on the bottom of the housing with an 1/8" allen wrench evenly (10-15 in. lbs maximum). See figure
8a and 8b.
Troubleshooting: If this fixture fails to operate properly, check to make sure: • The fixture is wired correctly.
rectly.
• The line voltage at the fixture is correct. If all these variables have been checked and the fixture still does not operate as speci-
fied, contact your local Lithonia Lighting distributor.
figure 8a
Lithonia Lighting Outdoor • One Lithonia Way • Conyers, Georgia 30012
Phone: 800-279-8041 • Fax: 770.918.1209 •
© 2010 Acuity Brands Lighting, Inc. All rights reserved. Rev 4/11
figure 7
www.lithonia.com
figure 8b
• The fixture is grounded cor-
Part Number: RJ521346 Rev C
Revision Date: 5-30-17