Epson LQ-1170 제품 지원 게시판 - 페이지 6
{카테고리_이름} Epson LQ-1170에 대한 제품 지원 게시판을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson LQ-1170 20 페이지. Understanding and using escp/3 commands and syntax
Epson LQ-1170에 대해서도 마찬가지입니다: 매뉴얼 (5 페이지), 제품 지원 게시판 (20 페이지), 제품 지원 게시판 (5 페이지), 기술 요약 (7 페이지), 설치 매뉴얼 (1 페이지), 조립 설명서 (8 페이지), 제품 지원 게시판 (16 페이지)

unless defined otherwise by the "ESC ( U command. Currently, the values for ml
and IT@ MUST be ml =2 and m2=0.
To determine the values for n1 and n2 perform the following steps.
1.
Determine the desired vertical motion distance in inches.
2
Multiply the distance by 360.
3.
Divide the result by 256 using long division.
4.
The remainder in the quotient from step 3 is the value for n1.
5.
The whole number in the quotient from step 3 is the value for n2
EXAMPLE
1.
The desired distance is 1 inch.
2
1 x 3 6 0 = 3 6 0
3.
4.
n1=104
5.
n2=1
In the Basic programming language, the command would look like thii.
'Reverse" paper feed less than l/2 inch can be performed with this command. To
1.
Determine the desired vertical motion dice in inches.
2
Multiply the distance by 360.
3.
Divide the result by 256 using long division.
4.
Subtract the remainder in the quotient computed in step 3 from 256.
5.
The result from step 4 is the value for n1.
6.
PSB No: P-0082
Page: 6 of 14