Epson LQ-1170 Product ondersteunings bulletin - Pagina 6

Blader online of download pdf Product ondersteunings bulletin voor {categorie_naam} Epson LQ-1170. Epson LQ-1170 20 pagina's. Understanding and using escp/3 commands and syntax
Ook voor Epson LQ-1170: Handmatig (5 pagina's), Product ondersteunings bulletin (20 pagina's), Product ondersteunings bulletin (5 pagina's), Technisch overzicht (7 pagina's), Installatiehandleiding (1 pagina's), Montagehandleiding (8 pagina's), Product ondersteunings bulletin (16 pagina's)

Pagina afdrukken
Epson LQ-1170 Product ondersteunings bulletin
unless defined otherwise by the "ESC ( U command. Currently, the values for ml
and IT@ MUST be ml =2 and m2=0.
To determine the values for n1 and n2 perform the following steps.
1.
Determine the desired vertical motion distance in inches.
2
Multiply the distance by 360.
3.
Divide the result by 256 using long division.
4.
The remainder in the quotient from step 3 is the value for n1.
5.
The whole number in the quotient from step 3 is the value for n2
EXAMPLE
1.
The desired distance is 1 inch.
2
1 x 3 6 0 = 3 6 0
3.
4.
n1=104
5.
n2=1
In the Basic programming language, the command would look like thii.
'Reverse" paper feed less than l/2 inch can be performed with this command. To
1.
Determine the desired vertical motion dice in inches.
2
Multiply the distance by 360.
3.
Divide the result by 256 using long division.
4.
Subtract the remainder in the quotient computed in step 3 from 256.
5.
The result from step 4 is the value for n1.
6.
PSB No: P-0082
Page: 6 of 14