Argos JX-503 조립 및 사용 설명서 - 페이지 9

{카테고리_이름} Argos JX-503에 대한 조립 및 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Argos JX-503 12 페이지. Pro power sit up bench

ASSEMBLING

Tools Required Assembling the Machine: Two Adjustable Wrenches, and one Philips Screw

driver.

NOTE: It is strongly recommended this machine to be assembled by two or more people to

avoid possible injury.

Carefully unpack each component, checking against the part list that you have all the

necessary parts to complete the assembly of your product

PLEASE NOTE that some of the parts may be pre-fitted to major components. So please

check carefully before contacting Argos in any event.

Step 1

A). Attach the Main Frame(#1) to the bracket on Incline Adjust Tube(#3), Align the hole and secure

front hole with one M10×65MM Allen Bolt, two Φ10mm

Nut (#10), insert the Lock Pin(#8) into the rear hole.

B). Insert the Incline Adjust Tube(#3) into the front opening of the Front T shape Stabilizer(#7),

Select desired height and secure with Lower Protection Holder Tube(#5) and Knob Nut(#17).

Attach two Foam

C).Attach the Backrest Pad(#2) to the Main Frame(#1), Align the hole and secure with four

M8×15MM Allen

D). Insert the Foam Roll Tube(#6) into the hole on the top of the Incline Adjust Tube(#3) with half

way, attach two Foam

F.) When finish workout, pull out the Lock Pin(#8), then fold up the Front T shape Stabilizer(#7)

and locked with Lock Pin(#8), the unit can be folded for storage to save space.

Rolls

(#4) from each side of the Lower Protection Holder Tube (#5).

(#13) and four Φ8mm

Bolts

Rolls

(#4) from each side of the Foam Roll Tube(#6).

Washers

(#12).

(#11) and one M10 Aircraft

Diagram 1