Epson Stylus color 600 매뉴얼 - 페이지 12
{카테고리_이름} Epson Stylus color 600에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson Stylus color 600 19 페이지. Epson stylus color 600: quick setup
Epson Stylus color 600에 대해서도 마찬가지입니다: 사용자 설명서 (34 페이지), 사용자 설명서 (38 페이지), 사용자 설명서 (35 페이지), 사양 (1 페이지), 제품 정보 시트 (4 페이지), 빠른 설정 매뉴얼 (17 페이지)
페이지 인쇄
EPSON Stylus COLOR 600
Using the Despooler
While your document is printing, the EPSON Despooler
dialog box appears on your screen:
Click to
pause
printing
Click to
cancel
printing
Note:
If you don't want the Despooler dialog box to appear
each time you print, you can turn it off. To do this, start
Spool Manager, open the View menu, and select Show
Despool Popup; the checkmark next to the option
disappears.
This dialog box shows the progress of your print job and the
status of your printer. If you run out of paper while printing,
for example, the Despooler warns you. You can use the
buttons to cancel, pause, or restart your print job.
The Status Monitor at the bottom of the dialog box shows
how much ink is left in your printer, along with these status
icons:
Checking the printer status.
A printing error has occurred and your
printer cannot print. Check your printer.
The printer is ready to print.
The printer is currently printing.
The ink level is low or empty; check the
or
A
ink out light on the control panel and
replace the cartridge if necessary.
Note:
The Status Monitor appears only if you're using
Windows 95 and you're not printing over a network.
12 - EPSON Stylus COLOR 600
Managing Print Jobs on a Macintosh
Your Macintosh printer software includes two management
utilities: Monitor2 and Status Monitor.
If you're using background printing, Monitor2 starts
automatically when you send a job to the printer. It handles
printing while you continue to work on your Macintosh
and lets you track documents that are waiting to be printed.
The name of
The Status Monitor alerts you to any problems that occur
the file you're
printing
during printing. You can also use it at any time to see how
appears here
much ink you have left.
Click to
Using Monitor2
restart
printing
The Monitor2 utility lets you continue to work on your
Macintosh while your document is printing. However,
background printing is slower and may also slow down your
system.
If you want to use this utility, you need to turn on
background printing in the Chooser and increase the memory
allocation for Monitor2. Follow these steps:
1. Open the Chooser from the Apple menu and select the
EPSON Stylus(EX)
modem icon.
2. Under
Chooser.
3. To increase the memory allocated to Monitor2, select
EPSON Monitor2
folder.
4. Choose
5. Set the Memory Requirements to 2000K or 3000K,
depending on your system's available RAM.
6. While you're printing, click the
the Application menu at the right end of the menu bar. You
see a dialog box like the following:
job currently
printing
jobs queued
for printing
would appear
here
B
7. You can select a job and cancel it or just use this window to
track the printer's progress.
1/97
icon. Then click either the printer or
, click
Background Printing
in the Extensions folder in your System
from the file menu.
Get Info
EPSON Monitor2
and close the
On
icon on