Epson Stylus color 600 매뉴얼 - 페이지 14
{카테고리_이름} Epson Stylus color 600에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson Stylus color 600 19 페이지. Epson stylus color 600: quick setup
Epson Stylus color 600에 대해서도 마찬가지입니다: 사용자 설명서 (34 페이지), 사용자 설명서 (38 페이지), 사용자 설명서 (35 페이지), 사양 (1 페이지), 제품 정보 시트 (4 페이지), 빠른 설정 매뉴얼 (17 페이지)
페이지 인쇄
EPSON Stylus COLOR 600
4. Click the
tab.
Details
5. Click the
button, then specify the network path
Add Port
to the printer and click
6. Open the Spool Manager window as described on page 10.
7. In the Spool Manager window, double-click your printer's
queue. The Queue Setup dialog box appears.
8. Make sure the
Use Print Manager for this port
checked. Then click
OK
Replacing an Ink Cartridge
When a
B
black or
A
color ink out light flashes, the indicated
cartridge is low on ink. This is a good time to make sure you
have a new cartridge. When the light stays on, the cartridge is
empty and you need to replace it.
Use these EPSON ink cartridges within six months of
installing them and before the expiration date on the package:
Black ink cartridge
Color ink cartridge
Caution:
For best results, don't replace an ink cartridge unless
its ink out light is flashing or on.
If ink runs out, you can't continue printing, even if ink
remains in the other cartridge.
To ensure good results, use genuine EPSON
cartridges and do not refill them. Other products may
cause damage to your printer not covered by EPSON's
warranty.
Removing an Empty Ink Cartridge
You can replace a cartridge when the
out light is either flashing or on. Follow these steps:
1. Make sure the printer is turned on and not printing.
2. Determine which cartridge needs to be replaced.
3. Lower the output tray and raise the printer cover.
Caution:
R
If you press the
light is flashing or on, the printer cleans the print
heads as described on page 18.
If you need to replace an ink cartridge before the lights
flash (because the ink is too old, for example) follow
the instructions on page 15.
Leave the old cartridge installed until you are ready to
replace it with a new one. Attempting to print without
a cartridge installed can damage your printer.
Once you remove an ink cartridge, it becomes
unusable and cannot be reinstalled.
14 - EPSON Stylus COLOR 600
.
OK
option is
.
S020093
S020089.
B
black or
A
color ink
cleaning button when no ink out
4. Press the
cleaning button and hold it for three seconds.
R
The print heads move slightly left and the
begins flashing. (The print heads return to their home
position if you don't proceed to step 5 within 60 seconds.)
5. Pull up the ink cartridge clamp. The cartridge rises up from
its holder. (Although the illustration shows the color ink
cartridge, the procedure is the same for replacing the black
ink cartridge.)
6. Lift the cartridge out of the printer and dispose of it
carefully.
7. Follow the steps in the next section to install the new ink
cartridge.
Installing the New Cartridge
Once you have removed the empty cartridge, you're ready to
install the new one. Follow these steps:
1. Remove the new ink cartridge from its packaging.
2. Remove the yellow tape seal as shown:
black cartridge
Caution:
You must remove the tape seal from the top of the
cartridge; leaving the tape on will permanently
damage it. Do not remove the clear seal from the
bottom of the cartridge; ink will leak out.
1/97
power light
P
ink cartridge clamp
color cartridge