Epson Stylus color 600 빠른 설정 매뉴얼 - 페이지 7

{카테고리_이름} Epson Stylus color 600에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson Stylus color 600 17 페이지. Epson stylus color 600: quick setup
Epson Stylus color 600에 대해서도 마찬가지입니다: 사용자 설명서 (34 페이지), 사용자 설명서 (38 페이지), 사용자 설명서 (35 페이지), 사양 (1 페이지), 제품 정보 시트 (4 페이지), 매뉴얼 (19 페이지)

페이지 인쇄

Note:

The printer is assigned to

parallel port LPT1; if you

want to use a different

port, see your Windows

documentation for

instructions.

Check the Printer

1. Turn off the printer.

2. While holding down the

printer. Then release the buttons.

3. A page prints out showing the ROM version and a

multicolor nozzle check pattern consisting of staggered

horizontal and straight vertical lines. When it's finished,

turn off the printer. If you have any problems with the test,

see Chapter 6 in your User's Guide for more information.

Connect the Printer to Your Computer

You can connect your EPSON Stylus COLOR 600 to either an

IBM

compatible PC or an Apple

shielded parallel cable to connect to a PC or an Apple System

Peripheral-8 serial cable to connect to a Macintosh. For a

complete list of system requirements, see the Introduction of

your User's Guide.

Connecting to a PC

1. Turn off the printer and your computer.

2. Connect the cable to the printer's parallel interface; then

squeeze the wire clips together until they lock in place. (If

your cable has a ground wire, connect it now.)

3. Connect the other end of the cable to your computer's

parallel port and secure it as necessary.

load/eject button, turn on the

Macintosh

. You'll need a

ground

wire