Epson Stylus color 600 Handleiding voor snelle installatie - Pagina 7

Blader online of download pdf Handleiding voor snelle installatie voor {categorie_naam} Epson Stylus color 600. Epson Stylus color 600 17 pagina's. Epson stylus color 600: quick setup
Ook voor Epson Stylus color 600: Gebruikershandleiding (34 pagina's), Gebruikershandleiding (38 pagina's), Gebruikershandleiding (35 pagina's), Specificaties (1 pagina's), Productinformatieblad (4 pagina's), Handmatig (19 pagina's)

Note:

The printer is assigned to

parallel port LPT1; if you

want to use a different

port, see your Windows

documentation for

instructions.

Check the Printer

1. Turn off the printer.

2. While holding down the

printer. Then release the buttons.

3. A page prints out showing the ROM version and a

multicolor nozzle check pattern consisting of staggered

horizontal and straight vertical lines. When it's finished,

turn off the printer. If you have any problems with the test,

see Chapter 6 in your User's Guide for more information.

You can connect your EPSON Stylus COLOR 600 to either an

IBM

compatible PC or an Apple

shielded parallel cable to connect to a PC or an Apple System

Peripheral-8 serial cable to connect to a Macintosh. For a

complete list of system requirements, see the Introduction of

your User's Guide.

1. Turn off the printer and your computer.

2. Connect the cable to the printer's parallel interface; then

squeeze the wire clips together until they lock in place. (If

your cable has a ground wire, connect it now.)

3. Connect the other end of the cable to your computer's

parallel port and secure it as necessary.

load/eject button, turn on the

Macintosh

. You'll need a

ground

wire