Epson Stylus Color 660 제품 정보 - 페이지 6

{카테고리_이름} Epson Stylus Color 660에 대한 제품 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson Stylus Color 660 11 페이지. Color ink jet printer
Epson Stylus Color 660에 대해서도 마찬가지입니다: 사용자 설명서 (34 페이지), 제품 정보 시트 (4 페이지), 사양 시트 (2 페이지), 제품 정보 시트 (4 페이지), 여기에서 시작하기 매뉴얼 (20 페이지), 서비스 매뉴얼 (40 페이지)

페이지 인쇄

EPSON Stylus COLOR 660

3. Make sure paper is loaded in the printer.

4. Hold down the E load/eject button and press the P power

button. Hold down the buttons until the P power light

starts to flash. Then release both buttons.

The printer prints one page containing the printer's ROM

version, ink counter code, and a nozzle check pattern. Only

the nozzle check pattern is shown below:

5. To end the check, turn off the printer after it prints the

check page. Then reconnect the interface cable and turn on

your printer and computer.

If the results are satisfactory, the problem lies in your

software settings, the interface cable, or your computer.

If the check page does not print correctly, you may have a

problem with your printer. Try the suggestions in

"Problems and Solutions" in the Printer Basics book.

Printing on Special Media

Whether you print on plain paper or special media, you need

to select the Media Type setting according to the guidelines in

the table below.

For this media name...

Plain paper

Envelopes

EPSON 360 dpi Ink Jet Paper

EPSON Iron-On Cool Peel Transfer Paper

EPSON High Quality Ink Jet Paper

EPSON Photo Quality Ink Jet Paper

EPSON Photo Quality Ink Jet Cards

EPSON Photo Quality Self Adhesive Sheets

EPSON Photo Quality Glossy Paper

EPSON Photo Paper

EPSON Photo Quality Glossy Film

EPSON Photo Stickers

EPSON Ink Jet Transparencies

Matte Paper - Heavyweight

Use the Flip Horizontal option to reverse your image before you

print it—especially if it includes text—so the image will appear

correctly when it's transferred.

6 - EPSON Stylus COLOR 660

select this Media Type

setting in your printer

software

Plain paper

360 dpi Ink Jet Paper

Photo Quality Ink Jet Paper

Photo Paper

Photo Quality Glossy Film

Ink Jet Transparencies

Matte Paper - Heavyweight

Additional Media Loading Guidelines

Don't use the cleaning sheets that may be included with

your special media; they may damage the printer.

Be sure to load the printable (whiter) side of the media face

up in the sheet feeder.

You can load paper up to the arrow mark on the left edge

guide.

In addition to the

the correct

Paper Size

Some special media have a cut corner that you need to

position correctly; follow any instructions in the package.

Always handle sheets by the edges, and don't touch the

printable surface.

printable

side face up

If the special media has protective sheets between each sheet

of media, be sure to remove the protective sheets before

printing.

Replacing an Ink Cartridge

When a B black or A color ink out light flashes, the indicated

cartridge is low on ink. This is a good time to make sure you

have a new cartridge. When the light stays on, the cartridge is

empty and you need to replace it. You cannot print if either

ink cartridge is empty.

You cannot print if either ink cartridge is empty. Leave

the empty cartridge installed in the printer until you have

obtained a replacement. Otherwise the ink remaining in

the print head nozzles may dry out.

Use these EPSON ink cartridges within six months of

installing them and before the expiration date on the package:

Black ink cartridge: S020187

Color ink cartridge: S020191

8/99

option, remember to select

Media Type

for your media on the Paper menu.

cut corner