DILISS T-388 사용자 설명서 - 페이지 5

{카테고리_이름} DILISS T-388에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DILISS T-388 14 페이지. Kids walkie talkie

페이지 인쇄

Turning off the radio

Press and hold

until an audible beep is heard and

the screen disappears.

Adjusting volume level

Use the up/down key to increase or

decrease the volume. And you can

always find the volume level indicator

in the lower right corner of the screen.

Receiving

The radio is ready to receive signals when it is tuned to

the channel that has the same frequency and CTCSS

code as the one that is transmitting. To receive signals,

you also need to leave this very radio's TALK button

untouched. When signals have been received on the

current channel, RX icon will appear in the lower right

corner of the screen.

Transmitting

Press and hold "TALK" button to talk

to another person. Release the button

for response.

TX Icon will appear in the lower right

corner of the screen when radio is

transmitting.

To get maximum clarity, please speak directly to the

microphone and hold the mic 2 inches from your mouth.

Note: RT388 can only work together when the units are

tuned to the same channel and have the same

CTCSS code on that channel.

Channel Lock

Press and hold MENU button until

icon

appears on the screen, which

indicates that the radio is locked to

the current channel, namely, you

cannot switch it to another channel

under this status.

To unlock the channel lock function, press MENU

button again for about 2 seconds.

Flashlight

The radio is equipped with flashlight

function, which will bring a lot of

convenience in the dark.

Press "LAMP" button to turn the

flashlight on. And the process to turn

it off is the same as turning it on, just

press "LAMP" button, that's it.

Select Channel

These units have 22 Channels available for US and

Canada market.

To select any among the 22, you need press MENU

button once, then the channel number on the screen

will blink;

Using up/down key to select the channel you want to

communicate on;

Press TALK button to choose the desired channel and

return to normal mode. Or press MENU button to confirm

the channel and go to set CTCSS code.