DILISS T-388 사용자 설명서 - 페이지 6

{카테고리_이름} DILISS T-388에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DILISS T-388 14 페이지. Kids walkie talkie

페이지 인쇄

Set CTCSS Code

Within a channel, you can partly

avoid interference from other radios

by setting CTCSS code (01-38)

while code 00 refers to no privacy

code is selected. To select any

among the 38, you need press MENU button twice,

then the CTCSS code on the screen will blink;

Using up/down key to select the code;

Press TALK button to confirm the desired code and go

back to normal mode.

Note: RT388 can only work together when the units are

tuned to the same channel and have the same

CTCSS code on that channel.

VOX for Hands-free

When VOX is activated, there is no

need to press TALK button to talk.

Tap MENU button three times, then

"VOX" and VOX sensitivity level

(OF,01,02,03) will be displayed on

the screen.

You can adjust VOX sensitivity level by pressing up/

down key.

Note: OF means VOX function is inactivated; 03 is the

highest sensitivity setting and 01 the lowest.

Therefore, level 03 is recommended when the

radio is used in quiet surroundings and 01 for

noisy environment.

Select Call Tone

To inform other radio users in your group that you want

to talk or you have finished talking by transmitting a

tone to their radios.

Press MENU button four times,

then "CA" and call tone number

(01, 02, 03, 04, 05, 06, 07, 08, 09,

10) will blink on the screen;

Using up/down key to select the

tone you prefer;

Press TALK button to confirm the desired tone and go

back to normal mode.

As to how to send the desired call tone to another party,

please go and check " Call another party" on Page.

Channel Scan

Convenient to detect channels with

activities.

When button

will automatically scan for channels

with activities. The scanning will

v ox

stop when channels with activities are found, and the

radio will play what it detects on that channel.

To continue the scan, just press button

Note: When a channel with activities is detected, you

can join the conversation and back away from the

scan by pressing TALK button.

Call Another Party

Press button

other radios in your group so that they

can be prepared when you want to talk

or you have finished talking. (See how

to select call tone on Page)

Note: Another party can only receive the call tone when

is tapped, the radio

to transmit a call tone to

the following requirements are met at the same

time.