Dillon FI-80 LCD 사용자 설명서 - 페이지 9

{카테고리_이름} Dillon FI-80 LCD에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dillon FI-80 LCD 19 페이지.

페이지 인쇄
Dillon FI-80 LCD 사용자 설명서
EXITING THE SETUP MENU
1. Power off the indicator.
2. Move the slide switch on the rear cover back to the left.
3. Power on the indicator. The display will go through a digit check, then settle into Normal
Operating mode. All front panel keys will now return to their normal mode of operation.
SETUP MENU DESCRIPTIONS
List and detailed descriptions of the items within the setup screens. Factory-set defaults are shown in
bold with a checkmark (√).
Note: Most "F" menu items configure the indicator to the attached load cell and are entered by a
qualified instrumentation technician. These parameters do not appear in this manual. Do not
change these parameters, or the indicator may not function properly or may report highly
inaccurate readings!
NAME/CODE
This item is for configuration by a qualified load cell indicator
F1
technician. Do not change this value or the instrument readings may
be in error.
F2
This item is for configuration by a qualified load cell indicator
technician. Do not alter this value or the instrument readings may be
in error.
F3
This item is for configuration by a qualified load cell indicator
technician. Do not alter this value or the instrument may respond
unpredictably.
F4
Selects the range within which the scale may be zeroed. Note that the
Zero Range
indicator must be in standstill to zero the scale.
F5
Defines 'motion' in number of divisions of change between the
Motion Band
present display update and the previous display. If motion has been
detected within the prior two seconds, the Print and Zero commands
are disabled.
If a stable reading is not needed for printing or zeroing in your
application, set this value at its highest number.
DESCRIPTION
CODE/VALUE
500
1,000
1,500
2,000
2,500
3,000
4,000
5,000√
6,000
8,000
10,000 12,000
20,000 30,000
40,000
50,000
25
50
75√
100
150
200
0d
0.5d√
1d
3d
5d
100%√
1.9%
FI-80 LCD extras:
2%
20%
1d√
3d
5d
10d
FI-80 LCD extras:
0.25d
15d
20d
30d
40d
50d