Dillon FI-80 LCD 사용자 설명서 - 페이지 8

{카테고리_이름} Dillon FI-80 LCD에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dillon FI-80 LCD 19 페이지.

SETUP

SETUP OVERVIEW

The indicator contains two main setup menus:

1. The "F" menu items configure the indicator to the attached load cell and is known as

"Configuration" settings.

technician.

2. The "A" menu items configure the serial communication port and general user options.

In setup mode the front panel keys become directional navigators to move around in the menus and to save

the selections.

ENTERING THE SETUP MENU

1. Power off the indicator.

2. Locate the slide switch on the rear cover and move it to the right.

NOTE: A metal plate held on by two drilled-head screws may conceal the slide switch.

The back cover may have a seal to keep unauthozed personnel from making changes

to the indicator.

3. Power on the indicator. The indicator shows " F 1" to indicate that you are in Setup

Menu mode.

NAVIGATING IN THE SETUP MENU

Use the directional keys shown in Figure 3-1 to move around in the Setup Menu Chart

shown in Figure 3-2 on the following page.

1. Press

setup heading.

2. Press the

3. Press

4. press the Set key to save the new selection. Press the

and return to the current heading,.

5. Repeat Steps 1 through 4 until the desired Setup & Configuration changes are made.

Most of these are entered by a qualified instrumentation

and

keys to move left and right to advance to the next or previous "F/A"

key once. The current saved setting is shown.

and

keys to scroll through selections for the current setup heading.

Figure 3-1: Setup Menu Key Assignments

SET

key to escape without saving