Dillon Precision Products D-Terminator 사용 설명서 - 페이지 3

{카테고리_이름} Dillon Precision Products D-Terminator에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dillon Precision Products D-Terminator 7 페이지. Electronic scale

D-Terminator Scale, May 2007

Fig. 4

plug the adapter into an outlet. DO

NOT SUBSTITUTE AC ADAPTERS.

Only use the AC adapter provided with

the scale. NOTE: Use of an AC adapter

other than the one provided may dam-

age the scale.

C. About the Scale:

1. Select a FLAT and LEVEL surface

which is not subject to vibration or air

movement .

2. A transparent, protective plastic

coating has been added over the LCD

display to prevent scratches during

shipment. This should be removed

before operation to provide a clear

view of the display. FIG 5.

3. Turn the scale on by pressing the

button marked "ON/OFF" once FIG 6.

5/22/07

8:34 AM

Page 3

Fig. 6

The scale is now on. The display will

show "+88.8.8.8." and then "0.00" with

a small arrow pointing to "g:gram" on

the extreme right side of the display.

This indicates that the scale is ready to

use. The "CAL/MODE" key will allow

you to toggle between GRAMS and

GRAINS after turning the scale on,

even if there is something being

weighed at the time.

4. When this scale is used in any

location where air movement may be a

factor, the "draft shield" should be used

to cover the weighing platform. FIG 7.

Fig. 7

Fig. 5

This prevents inaccurate readings due

to environmental influences.

This specially designed cover incor-

porates a grounding feature which

removes any static electricity within the