AEMC instruments DIGITAL FLEXPROBE 400D-24 사용자 설명서 - 페이지 5

{카테고리_이름} AEMC instruments DIGITAL FLEXPROBE 400D-24에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEMC instruments DIGITAL FLEXPROBE 400D-24 20 페이지.

Thank you for purchasing an AEMC

For best results and for your safety, read the enclosed operating

instructions carefully and comply with the precautions for use.

This instrument is protected against voltages of not more than

1000V with respect to ground in measurement CAT III or 600V in

CAT IV between the sensor and the conductor that measures the

current.

The protection provided by the instrument may be impaired if the

instrument is used other than as speciﬁed by the manufacturer.

•

Do not exceed the rated maximum voltage and current or the

measurement category.

•

Observe the conditions of use; temperature, relative humidity,

altitude, level of pollution, and location.

•

Before each use, check the integrity of the insulation on the

sensor, cable and housing. Do not use the instrument if it is

open, damaged, poorly assembled, or if its accessories appear

damaged.

•

The sensor must not be applied to or removed from uninsulated

conductors at dangerous voltages.

•

Use personal protection equipment systematically.

•

All troubleshooting and metrological checks must be

performed by competent and accredited personnel.

1.800.561.8187

CHAPTER 1

INTRODUCTION

Digital Flexbprobe.

PRECAUTIONS BEFORE USE

Digital Flexprobe

www.

.com

Models 400D & 4000D