AEMC instruments DIGITAL FLEXPROBE 400D-24 사용자 설명서 - 페이지 6

{카테고리_이름} AEMC instruments DIGITAL FLEXPROBE 400D-24에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEMC instruments DIGITAL FLEXPROBE 400D-24 20 페이지.

1.1

1.2

CAT IV: For measurements performed at the primary electrical supply

CAT III: For measurements performed in the building installation at the

CAT II: For measurements performed on circuits directly connected to

1.3

Upon receiving your shipment, make sure that the contents are consis-

tent with the packing list. Notify your distributor of any missing items. If

the equipment appears to be damaged, ﬁle a claim immediately with the

carrier and notify your distributor at once, giving a detailed description of

any damage. Save the damaged packing container to substantiate your

claim.

Digital Flexprobe

1.800.561.8187

International Electrical Symbols

Signiﬁes that the instrument is protected by double or reinforced insulation.

CAUTION - Risk of Danger! Indicates a WARNING and that the operator must

refer to the user manual for instructions before operating the instrument in all

cases where this symbol is marked.

Must not be applied to or removed from bare conductors at dangerous voltages.

Type B current sensor as per IEC 61010‑2‑032.

Important instructions to read and understand completely.

Important information to acknowledge.

Battery.

Compliance with the Low Voltage & Electromagnetic Compatibility European

directives (73/23/CEE & 89/336/CEE).

In the European Union, this product is subject to a separate collection system

for recycling electrical and electronic components In accordance with directive

WEEE 2002/96/EC.

Deﬁnition of Measurement Categories

(<1000V) such as on primary overcurrent protection devices,

ripple control units, or meters.

distribution level such as on hardwired equipment in ﬁxed instal-

lation and circuit breakers.

the electrical distribution system. Examples are measurements

on household appliances or portable tools.

Models 400D & 4000D

www.

.com