Motorola C200 서비스 매뉴얼 - 페이지 24

{카테고리_이름} Motorola C200에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola C200 40 페이지. D10 dual band wireless telephone

페이지 인쇄
Motorola C200 서비스 매뉴얼
Disassembly

Removing and Replacing the Transceiver Board

G
24
This product contains static-sensitive devices. Use anti-static handling procedures
to prevent electrostatic discharge (ESD) and component damage.
1.
Remove the battery cover, battery, SIM, antenna cover, and rear endo as
described in the procedures
2.
Remove the upper endo assembly from the transceiver board by lifting it
upwards and then allow the LCD display to pass through the hole of the front
endo.
3.
Using the flat end of the disassembly tool, carefully loosen the transceiver
board from the front housing.
Transceiver Board
Figure 11. Removing the Transceiver Board
4.
Lift the transceiver board completely away from the front housing as shown
in Figure 11.
5.
To replace, align the transceiver board with the front housing and gently press
into place.
➧
Ensure the keypad is correctly positioned in the front housing relative to the
transceiver board. Verify operation of the keys after replacing the transceiver board.
6.
Replace the rear housing, SIM, and battery as described in the procedures.
.
LCD Display
May 21, 2003
C200
Upper Endo
031358o-o
6809464A58