Motorola C200 서비스 매뉴얼 - 페이지 22

{카테고리_이름} Motorola C200에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola C200 40 페이지. D10 dual band wireless telephone

Disassembly

Removing and Replacing the Front Endo Assembly

Using the flat end of the disassembly tool, carefully disengage the catches on

each side of the housing, then carefully separate the endo assembly from the

front housing.

To replace, align the endo assembly to the front housing then firmly press

together until the catches engage and the housings are properly assembled.

Replace the antenna cover, SIM, battery, and battery cover as described in the

procedures.

Remove the battery cover, battery, SIM, antenna cover, and Endo assembly as

described in the procedures.

Using T5 driver, remove the 4 screws from the Endo assembly. See Figure 9.

Set the screws aside for re-use.

Screws

Figure 9. Removing the Front Endo Assembly

To replace, align the front endo assembly with the rear endo assembly. Insert

and tighten the 4 screws with the T-5 driver.

Replace the endo assembly, antenna cover, SIM, battery, and battery cover as

described in the procedures.

May 21, 2003

T5 Driver

C200

Screws

6809464A58