Motorola C200 Instrukcja serwisowa - Strona 22
Przeglądaj online lub pobierz pdf Instrukcja serwisowa dla Telefon komórkowy Motorola C200. Motorola C200 40 stron. D10 dual band wireless telephone
Drukuj stronę
Disassembly
Removing and Replacing the Front Endo Assembly
22
3.
Using the flat end of the disassembly tool, carefully disengage the catches on
each side of the housing, then carefully separate the endo assembly from the
front housing.
4.
To replace, align the endo assembly to the front housing then firmly press
together until the catches engage and the housings are properly assembled.
5.
Replace the antenna cover, SIM, battery, and battery cover as described in the
procedures.
1.
Remove the battery cover, battery, SIM, antenna cover, and Endo assembly as
described in the procedures.
2.
Using T5 driver, remove the 4 screws from the Endo assembly. See Figure 9.
Set the screws aside for re-use.
Screws
Figure 9. Removing the Front Endo Assembly
3.
To replace, align the front endo assembly with the rear endo assembly. Insert
and tighten the 4 screws with the T-5 driver.
4.
Replace the endo assembly, antenna cover, SIM, battery, and battery cover as
described in the procedures.
May 21, 2003
T5 Driver
C200
Screws
o
6809464A58