Epson TM-L90 series 제조 매뉴얼 - 페이지 8

{카테고리_이름} Epson TM-L90 series에 대한 제조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson TM-L90 series 22 페이지. Attaching cover on the power switch
Epson TM-L90 series에 대해서도 마찬가지입니다: 브로셔 (1 페이지), 브로셔 (2 페이지), 제품 설명서 (27 페이지), 사양 (2 페이지), 사양 (8 페이지), 정보 매뉴얼 (5 페이지), 사양 (4 페이지), 사용자 설명서 (40 페이지), 사용자 설명서 (17 페이지), 사용자 설명서 (21 페이지), 사용자 설명서 (21 페이지), 여기에서 시작 (2 페이지), 여기에서 시작 (2 페이지), 매뉴얼 (13 페이지), 사용 설명서 (12 페이지), 사용자 설명서 (36 페이지), 개발 매뉴얼 (34 페이지), 매뉴얼 (2 페이지)

페이지 인쇄

1. Automatic Paper Layout Setup

Confidential

3. DIE-CUT LABEL ROLL PAPER

3.1 Die-Cut Label Paper

Die-cut label paper is label paper that has a predefined size of labels with an interval between

labels.

3.2 Specified Original Paper

The following original paper types can be used for die-cut label roll paper:

• Single-color thermal label paper type no.:

HD-75

KL470

KL80GT

• Two-color thermal label paper type no.:

BR21

3.3 Print Density Adjustment

For best print quality and reliability, select the proper print density for the paper type used as

described in the table below. If printing is performed with a density that exceeds the density

described in the table below, the reliability is not guaranteed. Print density can be set with a

software command.

Original paper no.

HD-75, KL470, KL80GT, BR21

3.4 Paper to Use for High Speed

If any of the following original paper types of thermal paper are used, the memory switch for the

customized value setting can be used to set the maximum print speed up to 150 mm/s {5.91

(level 9). Default is 120 mm/s {4.72"/s}:

• HD-75, KL470, KL80GT

3.5 Requirements for Die-Cut Label Paper Thickness and Peeling Strength

Requirements for the thickness of the die-cut label paper, peeling strength against backing

paper, and the adhesive agent that can be used with the printer are shown in the figure below:

Thermal paper (label)

Thickness: 70 ~ 92 µm

Nippon Paper Industries Co., Ltd.

NAKAGAWA MFG (USA). Inc.

(Face stock is Kanzaki Specialty Paper (USA))

NAKAGAWA MFG (Germany). GmbH.

(Face stock is KANZAN Spezialpapiere GmbH (Germany))

OJITAC Co., Ltd.

Die-Cut Label Paper Thickness Requirements

TITLE

TM-L90

Roll Paper

Manufacturing Guide

Density level

130%

Adhesive agent (acrylic emulsion)

Thickness: 9 ~ 21 µm

Peeling strength (against backing paper)

0.098 N/25 mm or more (JIS Z0237)

Backing paper

(separation paper)

Thickness: 41 ~ 71 µm

SHEET

REVISION

/s}

NO.

SHEET